CMS RPM Third-Party Staff Rule: What the Final 2027 Rule Changed for Practices

New 2027 Advance Care Planning Codes: What G0572 and G0573 Mean for Nurse-Led ACP
Expert Oversight: This page is maintained by the Virtual RNs Team
Reviewed for Accuracy by: Adam Nager, Chief Executive Officer (CEO)
Last Reviewed: November 13, 2026

What did CMS finalize for RPM third-party staff?

As of November 2026, the CMS RPM third-party staff rule is a Medicare billing policy that will require remote patient monitoring and remote therapeutic monitoring time to be performed by clinical staff directly employed by the billing practice. The CY 2027 final rule delayed that requirement two years, to January 1, 2029, but kept a new initiating visit requirement starting January 1, 2027.

  • Third-party staff allowed through 2028: Practices can keep contracting RPM and RTM clinical staff through December 31, 2028, as long as every existing incident-to and billing rule is met.
  • New patients need an initiating visit in 2027: Starting January 1, 2027, new RPM and RTM patients need a separately reportable in-person or telehealth visit where monitoring is discussed, while patients already enrolled are grandfathered.
  • Technology vendors are not affected: Practices may still buy devices, software, data hosting, and technical support from outside companies.

What CMS Finalized on November 4, 2026

The Centers for Medicare and Medicaid Services released the CY 2027 Physician Fee Schedule final rule on November 4, 2026, published as Federal Register document 2026-22743 (final rule text). In the July proposed rule, CMS had proposed that, beginning January 1, 2027, RPM and RTM codes could be billed only when the clinical staff time came from a direct employee of the practitioner or practice. Many commenters asked CMS to delay or drop the policy, citing staffing shortages, rural access, and existing vendor contracts.

CMS kept the policy but pushed it back. The final rule says that beginning January 1, 2029, RPM and RTM codes cannot be billed when the service is not performed by clinical staff who are direct employees, and contracting out to third-party companies will not be allowed after that date. CMS also said it will publish sub-regulatory guidance before then clarifying which clinical staff arrangements may be appropriate.

PolicyJuly 2026 proposalNovember 2026 final rule
Direct-employee requirement for RPM and RTM clinical staffEffective January 1, 2027Effective January 1, 2029
Third-party contracted clinical staffNot allowed after December 31, 2026Allowed through December 31, 2028
Initiating visit for new RPM and RTM patientsRequired from January 1, 2027Finalized, effective January 1, 2027
Patients already enrolled before 2027Not specifiedGrandfathered, no initiating visit needed
RTM limited to established patientsProposedFinalized
Outside device, software, and tech support vendorsClarification requested in commentsExpressly allowed

CMS tied the policy to program integrity. The rule cites Office of Inspector General findings, including its 2024 report calling for additional oversight of remote patient monitoring in Medicare, which described companies cold-calling beneficiaries to solicit monitoring they may not need. CMS said outsourcing monitoring to third parties with little connection to the treating practitioner can fragment care and weaken oversight.

This post replaces our earlier coverage of the July proposal, which assumed a January 2027 effective date. If you read that version, the most important change is the date: practices now have two more years before the direct-employee requirement applies.

Who does the RPM third-party staff rule affect?

The rule affects any practice billing Medicare for RPM or RTM that relies on clinical staff who are not its own direct employees, including staff supplied by RPM vendors, staffing companies, or outsourced nurse lines. Practices that only buy devices or software from vendors, and use their own employees for monitoring time, are not affected by the staffing change.

The new initiating visit rule is broader. It applies to every practice starting a new Medicare patient on RPM or RTM on or after January 1, 2027. The visit can be in person or by telehealth, must be separately reportable, and must include a discussion of remote monitoring, although monitoring does not have to be its only purpose. A new visit is not required for routine changes such as a new device, a clinical change, or a different billing practitioner in the same practice.

Telehealth adds a wrinkle. CMS noted that it lacks authority to extend Medicare telehealth flexibilities on its own. After December 31, 2027, absent new legislation, telehealth initiating visits will be limited by the statutory telehealth rules that remain in effect.

One question we hear constantly from practice owners is whether these rules apply to commercial plans. They are Medicare billing rules. Commercial payers and Medicare Advantage plans set their own policies, so practices should check each contract rather than assume the Medicare rule carries over.

Primary care, cardiology, endocrinology, and nephrology practices with large chronic disease panels carry the most exposure, because they tend to run RPM alongside chronic care management. Our guide to virtual nurses for chronic care management covers how those programs are typically staffed.

What does this mean for practices using virtual nurses?

Through December 31, 2028, practices can continue using contracted clinical staff for RPM and RTM if all incident-to and billing requirements are met. From January 1, 2029, clinical staff time counted toward RPM and RTM codes must come from direct employees, unless CMS guidance recognizes other arrangements. Administrative support around monitoring programs is not affected.

That distinction matters for how we work. Virtual RNS places dedicated team members who work exclusively for one practice, but they are not the practice’s own W-2 employees. As of November 2026, CMS has not said whether dedicated staff provided through a staffing company will qualify after 2028. Until that guidance is published, practices should not assume that virtual clinical staff time will count toward RPM billing in 2029.

A large share of RPM work is not billable clinical staff time, though. Scheduling initiating visits, documenting consent, coordinating device shipments, following up on missed readings, preparing data summaries for provider review, managing refill and referral requests that monitoring triggers, and answering patient calls all support the program without being counted toward the clinical staff minutes in codes such as 99457 and 99458. Our team members handle exactly that kind of work every day.

In our experience supporting practices with virtual staff, the programs that run best keep a clear line between the clinical time the practice bills and the administrative work that keeps the program moving. Practices that blur that line are the ones that struggle in an audit.

Practices should also confirm with compliance counsel how their state defines clinical staff and incident-to supervision, since those rules apply on top of the Medicare policy.

How much is RPM worth in 2027?

Under the CY 2027 final rule, Medicare pays about $41.11 nationally for a month of device supply with 16 or more days of readings, CPT 99454, and about $51.55 for the first 20 minutes of treatment management, CPT 99457. Each additional 20 minutes, CPT 99458, pays about $41.11.

CPT codeService2027 national rate
99453Initial setup and patient education$19.90
99454Device supply, 16 to 30 days of readings$41.11
99445Device supply, 2 to 15 days of readings$41.11
99457First 20 minutes of treatment management$51.55
99470First 10 minutes of treatment management$26.43
99458Each additional 20 minutes$41.11

Rates are national nonfacility amounts calculated from the CY 2027 Addendum B relative value units and the $32.6286 conversion factor, before geographic adjustment. Commercial and Medicare Advantage rates vary by contract.

Consider a primary care practice with 50 Medicare patients on RPM, each meeting the 16-day reading threshold and receiving 20 minutes of treatment management a month. Billing 99454 and 99457 for each patient brings in about $4,633 a month, or roughly $55,600 a year, before patient cost sharing. If that program depends on vendor-supplied clinical staff, the practice has until the end of 2028 to bring the clinical time in-house, or the revenue stops on January 1, 2029.

The initiating visit rule also changes the math for new enrollees. Every new Medicare RPM patient from January 2027 onward needs a qualifying visit first, so practices that enroll patients through outreach calls will need to schedule those visits. Our RPM, CCM, and AWV billing ROI guide shows how monitoring revenue fits alongside other care management services.

What should practices do before 2027 and 2029?

  1. Inventory every Medicare RPM and RTM patient and note who performs the clinical staff time for each.
  2. Build an initiating visit step into your RPM enrollment workflow for new patients starting January 1, 2027.
  3. Document which patients were already enrolled before January 1, 2027, since they are grandfathered from the initiating visit.
  4. Review vendor contracts that supply clinical staff time and note their end dates relative to December 31, 2028.
  5. Separate billable clinical staff time from administrative support in your documentation.
  6. Plan how you will hire or assign direct employees for RPM clinical time before January 1, 2029.
  7. Watch for CMS sub-regulatory guidance on acceptable staffing arrangements, expected before 2029.

The second and fifth steps matter most in 2027. The initiating visit requirement takes effect in less than two months, and a missing visit makes the monitoring claim unbillable. Clean separation between clinical time and administrative work protects every claim you submit between now and 2029.

Providers often come to us when an RPM program has grown faster than the in-office team can support. The pattern is usually the same: the provider and a nurse own the clinical decisions, but the scheduling, device logistics, missed-reading follow-up, and patient calls swamp the office. That support work is where dedicated virtual staff fit, regardless of how CMS ultimately defines billable clinical staff.

Need help running the scheduling, patient calls, and follow-up behind your RPM program? Book a call with Virtual RNS, and we will review your workflow and show you where dedicated virtual staff fit under the new rules.

Common Misreadings of the Final Rule

The first misreading is that third-party RPM staff are banned starting January 2027. They are not. The final rule delayed the direct-employee requirement to January 1, 2029, and contracting remains allowed through December 31, 2028, provided all existing billing rules are met.

The second misreading is that nothing changes in 2027. The initiating visit requirement for new RPM and RTM patients and the established-patient requirement for RTM both take effect January 1, 2027.

The third misreading is that practices must stop using RPM technology vendors. CMS expressly allowed outside companies to supply devices, software, connectivity, data hosting, cybersecurity, and technical support. The restriction applies to clinical staff time, not technology.

The fourth misreading is that clinical staff must work on-site. CMS said in the proposal and the final rule discussion that direct employees do not need to be physically located in the practice, and that general supervision continues to apply.

Finally, some practices assume existing patients need new visits in January. Patients already receiving remote monitoring before January 1, 2027 do not need an initiating visit to continue, as long as all other requirements are met. CMS warned against rushing enrollments before that date to avoid the rule. For other ways virtual staff support patients outside clinic hours, see our coverage of virtual nurses handling after-hours patient calls.

Frequently Asked Questions

Is the RPM outsourcing ban finalized?

Yes, with a delay. The CY 2027 Physician Fee Schedule final rule requires RPM and RTM clinical staff time to come from direct employees of the billing practice starting January 1, 2029. Contracting with third-party companies for clinical staff remains allowed through December 31, 2028, if all existing billing rules are met.

When does the RPM initiating visit requirement start?

The initiating visit requirement starts January 1, 2027 for new Medicare RPM and RTM patients. The visit must be separately reportable, in person or by telehealth, and include a discussion of remote monitoring. Patients already enrolled before January 1, 2027 are grandfathered and do not need a new initiating visit.

Can virtual nurses still perform RPM work?

Through December 31, 2028, contracted clinical staff can perform RPM work if incident-to and billing rules are met. After that, billable clinical time must come from direct employees unless CMS guidance allows other arrangements. Administrative work such as scheduling, device logistics, and patient calls is not limited by the rule.

Can practices still use RPM software and device vendors?

Yes. CMS stated that practices may obtain devices, software, connectivity, data hosting, cybersecurity, implementation support, and technical assistance from outside companies. The 2029 restriction applies only to clinical staff time supplied by third parties, not to the technology used to run a monitoring program.

Does the rule apply to commercial insurance?

No. The policy is a Medicare Physician Fee Schedule billing rule. Commercial payers and Medicare Advantage plans set their own remote monitoring policies, so practices should review each payer contract and policy bulletin rather than assume the Medicare staffing rule applies.

What does RPM pay in 2027?

At 2027 national Medicare rates, CPT 99454 for 16 or more days of device readings pays about $41.11, CPT 99457 for the first 20 minutes of treatment management pays about $51.55, and CPT 99458 for each additional 20 minutes pays about $41.11, before geographic adjustment.

Next Steps

Build the initiating visit into your enrollment workflow before January 1, 2027, and start planning now for direct-employee clinical staff before January 1, 2029. The two-year delay is a planning window for your practice, not a reason to wait, because hiring and training in-house monitoring staff takes months.

See how virtual staff support monitoring and care management through our remote support services and virtual medical assistant services, or read our guide to virtual nurses for chronic care management.

When you are ready, book a call. We will review your monitoring workflow, separate the clinical work your team bills from the support work that keeps the program moving, and recommend where dedicated virtual staff can help your team in 2027 and beyond.

Keep your RPM program running smoothly under the 2027 rules. Book a call to add dedicated virtual staff for scheduling, patient calls, and follow-up.

Virtual Nurse Robot Circle
VIRTUAL RNS

Fill out the form to get started: